Answer
May 20, 2022 - 08:17 AM
The SolidRF Fiber DAS 4400 is a 50-ohm system that requires 50-ohm cables. RG6 is a 75-ohm coax cable, so its impedance is not compatible with the Fiber DAS 4400.
This system comes with 50-ohm low-loss TS-400 coax cable that connects the MU and the RUs to the antennas. For longer runs of coax, you can also use half-inch cable (including plenum-rated coax) that has even lower loss per foot. For short runs of cable (up to 20 to 30 feet), you can use LMR195 or RG58 coax).
This system comes with 50-ohm low-loss TS-400 coax cable that connects the MU and the RUs to the antennas. For longer runs of coax, you can also use half-inch cable (including plenum-rated coax) that has even lower loss per foot. For short runs of cable (up to 20 to 30 feet), you can use LMR195 or RG58 coax).